Type T : Teeth allow to move debris/soil making free iron pieces which can then be captured by the magnet.   ITM 75 ITM 85 ITM 95 ITM 105 ITM 115 ITM 125 ITM 150 Peso T Series kg 650 950 1200 1450 1600 2050 2950 — Diametro mm 750 850 950 1050 1150 1250 […]

Type C (with chains): More common in recycling yards, are easily mounted on loaders equipped with an hook. Type P (with plate): An excavator adapter can be bolted on, ensuring quick coupling and the possibility of tilting or better positioning the magnet.     ITM 75 ITM 85 ITM 95 ITM 105 ITM 115 ITM […]

IP2 demolition shear has a weight of 320 kg, an opening of 365 mm and a length of 1.040 mm. Has the mechanical rotation at 360°, the maximum working pressure is 210 bar.

IP7 hydraulic demolition shear has a weight of 650 kg, an opening of 570 mm and a length of 1.500 mm. The maximum working pressure is 300 bar.

IDF2 pulverizer crushers has a weight of 185 kg, an opening of 320 mm and a length of 900 mm.

Special equipment dedicated to cutting tanks and flat iron plates. It cuts a rectangular slot in the steel, producing smooth and straight edges of steel plates on barges, railway cars, grain, water, oil and fuel tanks always leaving the remaining sections flat and easy to handle. The standard range goes from 2 to 7 ton of weight […]

Delivering power, speed and toughness without rivals. The IRC35 will easily break Vignola type rails of all sizes, in high quantities for many years

IC18 steel shear is suitable for the demolition of small / medium size metal elements. The shear IC18 has a weight of 1.950 kg and a mouth opening of 480 mm. With hydraulic pressure adjusted to 320 bar its cutting capacity is enough to cut a 65 mm full round rod.

IF16 rotating crusher has a weight of 1.750 kg, a mouth opening of 700 mm and a length of 2.000 mm. The maximum hydraulic working pressure is 340 bar.

IF20 rotating crusher has a weight of 2.000 kg, a mouth opening of 750 mm and a length of 2.220 mm. The maximum hydraulic working pressure is 340 bar.